Share:


CHINT PD7777 Series DIGITAL Multi-functional Electric Meter Malaysia Thailand Singapore Indonesia Philippines Vietnam Europe USA

Function

 has programmable measurement、display、digital communication, etc. many functions, it’s mainly used in measuring and analyzing several electrical parameters. It can realize the display and teletransmission of electrical parameters through RS485 data interface communicating with the external device.

Function expansion: 4-way analog output(0~20mA/4~20mA) can realize transmitting output function of electricity; 4-way switch input and 4-way switch output can realize local/remote switch signal detection and control output function(“remote communication” and “remote control”functions). You can program and set parameters including transformer rate、upper and lower limit alarm value、communication address of the meter、communication baud rate、transmitting output method、transmitting output range, etc. by pressing the programmable keys on the panel.

Specification and selection instructions

Basic parameters

 input rated voltage: AC100V、220V、380V

 input rated current: AC1A、5A

 input frequency range: 45~65Hz

input network: 3 phase 3 wire、3 phase 4 wire

 measuring accuracy of voltage、current、frequency、active power、power factor: ±(0.5%range+1 word)

measuring accuracy of reactive power: ±(1.0%range+1 word)

measuring accuracy of active energy: ±0.5% (just for reference, not as the basis of measurement and charging)

measuring accuracy of reactive energy: ±2% (just for reference, not as the basis of measurement and charging)

impulse output: optical coupling output of open collector, the voltage of open collector VCC≦48、current≦50mA

impulse constant: 10000imp/kwh or 10000imp/kvarh

alarm(switch) output: 4-way relay NO contact, the capacity of contact 30VDC/1A,240VAC/1A(resistive negative)

switch input: 4-way power contact(built-in+5V power supply)

analog transmitting output: 4-way output ,output range:DC0~20mA/4~20mA can be programmed and set, accuracy class: ±0.5%

load capacity of transmitting output: Rmax=500Ω

communication interface(optional): RS-485 serial communication, MODBUS_BTU communication protocol, baud rate 1200bps、2400bps、4800bps、9600bps、19200bps.

auxiliary power supply: AC/DC 86~264V, power consumption<5VA

Specifications

Sorry, currently do not have any product specifications
Sorry, currently do not have any video uploaded.
Sorry, currently do not have any file for download.